Metronic AccessBox Betriebsanweisung PDF herunterladen (Seite 13)

For the TV list or the radios list, you can move a channel, remove it, rename it, mask it or block it. A mas-

ked channel is not accessible with the CH keys. A blocked channel requires a PIN code to be wat-

ched. You can also sort the channel list according to some criteria. To customise the television channel

list, go into MENU / ORGANIZING SERVICES / TV CHANNEL. With the keys, select the desired func-

tion:

• DELETE to erase one or more channels. With CH keys, highlight the channel to be erased and press

OK. Its number becomes yellow. You may select other channels in the same way. Once your selection

is over, press on MENU to remove all the selected channels.

• MOVE to move a channel. Highlight the channel to be moved and press OK. Enter the new location and

confirm by OK. Be careful, moving a channel is impossible if any sorting is enabled (see further).

• RENAME to modify a channel name. With the CH keys, highlight the channel to be renamed and

press OK. The virtual keyboard appears, select letter by letter the new name (DEL to erase). Highlight

SAVE and press to save and exit.

• LOCK to lock a channel. Highlight the channel to be locked and press OK. A small lock appears after

the name. You can select/block other channels in the same way. Once your selection is over, press

MENU to block the entire list of selected channels.

• SKIP to skip one or more channels. Highlight the channel to be skipped and press OK. A double arrow

is displayed after the name. You can select other channels in the same way. Once your selection fini-

shed, press MENU to skip all the channels selected. Skipped channels are no longer accessible with the

CH Up/Down keys, but only through the channel list (key OK).

• SORT to activate a channel sort. You can select various criteria by ticking off the corresponding item.

Most practical A-Z + SATELLITE (alphabetical sorting by satellite) and SAT WITH FREQ. (sort by fre-

quency and satellite). Press on MENU to launch the sorting process. To come back to the original arran-

gement, make sure that none of items are ticked off and press MENU.

Particular channel shearch (PID)

In some cases (rare) a manual or automatic search doesn't find a channel that actually exists

however. You should then add it with its "PID" which you will find in the specialised magazines

or websites.

• Go into, in MENU / INSTALLATION / CHANNEL SEARCH

• On the line SATELLITE, press OK to display the satellites list.

• With the CH keys, select the satellite, which emits the channel to be added, then press OK.

• On the line SEARCH MODE, select ADVANCED.

• On the line FREQUENCY, type the 5 digits of the transponder frequency.

• On the line SYMBOL RATE, type the 5 digits of the symbol rate (SR).

• On the line PID and press OK to reach the ENTER PID's window.

• Enter the 3 PID' S requested. For information, PCR PID is often equal to the VIDEO PID for a

television, and equal to the PID AUDIO for a radio. A radio is characterised by a null VIDEO PID.

• Select SAVE and press OK. Press EXIT to leave all the menus, the new channel is called TV xxx

or Radio xxx. You will be able to rename it in the menu ORGANIZATION.

Scanner

The scanner is a powerful function which enables you to find channels, even if you do not know

their technical parameters. This function can be particularly useful if you have a LNB of which you

do not know the characteristics, or if you live in a dwelling house, where the satellite signal is dis-

tributed at unknown frequencies.

• Go into MENU / INSTALLATION / AUTOMATIC TUNING

• Select the line SATELLITE, press OK to display the satellites list.

• With the CH keys, select the satellite, which emits the channel to be added, then press OK.

• If you wish to make a particular search in frequencies ranges, enter the limits of the range on the

lines START FREQUENCY and END FREQUENCY. If you don't know which frequency band you

want to scan, just let the pre-defined values

• On the line POLARISATION, leave VER + HOR.

• Unless otherwise specified, the search is carried out on the standard SR's 27500 and 22000. You

can modify them and/or add a third one.

• Go to FTA / SCRAMBLED and press OK. The receiver will initially search the emission frequen-

cies then the channel on each one of these frequencies.

MODIFYING / ORGANIZING CHANNELS

Ntc Accessbox-GB 3/11/03 8:44 Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Metronic AccessBox Betriebsanweisung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger Metronic AccessBox